UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2256
                        
                            Issued:1959-05-01
                    
                            Revised:2012-04-25
                    
                            Style
                            2256
                        
                            Special Style Non-Metallic Surface Extension.
                    
			Rating60 deg C, 150 Vac.
		
			Conductor12 AWG bare solid copper
		
			InsulationIntegral with Jacket. PVC, 0.5 inch (with minus 1/32-inch tolerance) between conductor centers, same as type SPT-3 except for the following dimensions: Approx. overall width - 45/64 inch. Approx. overall height - 12/64 inch. Minimum insulation thickness around conductors - 30 mil. On one flat side between conductors there shall be a V-shaped longitudinal groove, approx. 1/16 inch deep with a maximum width of 5/64 inch.
		
			AssemblyTwo conductors
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSee Facing Page. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2256	Issued:1959-05-01
			Revised:2012-04-25


Rating	60 deg C, 150 Vac.

Conductor	12 AWG bare solid copper

Insulation	Integral with Jacket. PVC, 0.5 inch (with minus 1/32-inch tolerance) between conductor centers, same as type SPT-3 except for the following dimensions: Approx. overall width - 45/64 inch. Approx. overall height - 12/64 inch. Minimum insulation thickness around conductors - 30 mil. On one flat side between conductors there shall be a V-shaped longitudinal groove, approx. 1/16 inch deep with a maximum width of 5/64 inch.

Assembly	Two conductors

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	See Facing Page. Polarity identification may be omitted.