UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2290
                        
                            Issued:1959-05-01
                    
                            Revised:2011-10-04
                    
                            Style
                            2290
                        
                            Paralle cable with extruded intergral Insulation and Jacket
                    
			Rating60 deg C, 300 Vac, FT2 flame.
		
			ConductorTwo No. 18 AWG, consisting of No. 34 AWG untinned copper strands and one No. 22 AWG consisting of No. 30 AWG tinned copper strands.
		
			InsulationExtruded PVC, 60 mils minimum average hickness, 54 mils minimum thickness at any point.
		
			AssemblyOver two conductors same as for Type SPT-3 with a Shield, nominal 60 mils wall except for a minimum 58 mils wall after rip. Over one conductor a 42 mils wall of polyethylene with a wrap shield of 40 ends of No. 34 AWG tinned copper with five ends of No. 34 AWG in a reverse wrap.
		
			JacketExtruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseIn stereophonic amplifiers.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2290	Issued:1959-05-01
			Revised:2011-10-04


Rating	60 deg C, 300 Vac, FT2 flame.

Conductor	Two No. 18 AWG, consisting of No. 34 AWG untinned copper strands and one No. 22 AWG consisting of No. 30 AWG tinned copper strands.

Insulation	Extruded PVC, 60 mils minimum average hickness, 54 mils minimum thickness at any point.

Assembly	Over two conductors same as for Type SPT-3 with a Shield, nominal 60 mils wall except for a minimum 58 mils wall after rip. Over one conductor a 42 mils wall of polyethylene with a wrap shield of 40 ends of No. 34 AWG tinned copper with five ends of No. 34 AWG in a reverse wrap.

Jacket	Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	In stereophonic amplifiers.