UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2297
                        
                            Issued:1959-07-17
                    
                            Revised:2011-10-10
                    
                            Style
                            2297
                        
                            Parallel cable with extruded integral insulation.
                    
			Rating105 deg C, 300 Vac, FT-2 Flame, Optional - 60 deg C or 80 deg C Oil Resistant.
		
			Conductor18 or 16 AWG, stranded, consists of 30 AWG or smaller conductor strands.
		
			InsulationExtruded PVC, 60 mils minimum average thickness. The following minimum (pin gauge) dimensions shall apply: Wall thickness: 0.058 inch, Web thickness: 0.078 inch, Wall after rip: 0.028 inch.
		
			AssemblyThree-conductor, same as flexible cord type SPT-2.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electric refrigerators where ripped not more than three inches and where exposed to temperatures not exceeding 105 deg C; or Internal wiring of butter conditioners where exposed at the door hinge at a temperature not exceeding 105 deg C. Either marking may also add where applicable dependent upon the compound use; and where exposed to oil at a temperature not exceeding 60 deg C or 80 deg C; whichever is applicable. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2297	Issued:1959-07-17
			Revised:2011-10-10


Rating	105 deg C, 300 Vac, FT-2 Flame, Optional - 60 deg C or 80 deg C Oil Resistant.

Conductor	18 or 16 AWG, stranded, consists of 30 AWG or smaller conductor strands.

Insulation	Extruded PVC, 60 mils minimum average thickness. The following minimum (pin gauge) dimensions shall apply: Wall thickness: 0.058 inch, Web thickness: 0.078 inch, Wall after rip: 0.028 inch.

Assembly	Three-conductor, same as flexible cord type SPT-2.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electric refrigerators where ripped not more than three inches and where exposed to temperatures not exceeding 105 deg C; or Internal wiring of butter conditioners where exposed at the door hinge at a temperature not exceeding 105 deg C. Either marking may also add where applicable dependent upon the compound use; and where exposed to oil at a temperature not exceeding 60 deg C or 80 deg C; whichever is applicable. Polarity identification may be omitted.