UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2302
                        
                            Issued:1959-07-17
                    
                            Revised:2012-07-27
                    
                            Style
                            2302
                        
                            Parallel cable with extruded integral insulation and jacket
                    
			Rating105 deg C, 300 Vac, FT2 flame, Oil Resistant 60 deg C or 80 deg C (optional).
		
			Conductor18 AWG consisting of No. 30 AWG or smaller tinned or bare copper.
		
			InsulationIntegral with Jacket. Extruded PVC, 28 mils min average, 25 mils minimum at any point.
		
			AssemblyFour conductors, same as type SPT-3; except for a nominal 80 mil seperation between conductors, the following minimum (pin gauge) dimensions: Wall thickness: 0.028 in., Web thickness: 0.70 in., Wall after rip: 0.028 in..
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electric refrigerators where installed within separate metal enclosure or between walls of the cabinet. Dependent upon the compound used.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2302	Issued:1959-07-17
			Revised:2012-07-27


Rating	105 deg C, 300 Vac, FT2 flame, Oil Resistant 60 deg C or 80 deg C (optional).

Conductor	18 AWG consisting of No. 30 AWG or smaller tinned or bare copper.

Insulation	Integral with Jacket. Extruded PVC, 28 mils min average, 25 mils minimum at any point.

Assembly	Four conductors, same as type SPT-3; except for a nominal 80 mil seperation between conductors, the following minimum (pin gauge) dimensions: Wall thickness: 0.028 in., Web thickness: 0.70 in., Wall after rip: 0.028 in..

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electric refrigerators where installed within separate metal enclosure or between walls of the cabinet. Dependent upon the compound used.