UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2307
                        
                            Issued:1960-01-05
                    
                            Revised:2012-04-17
                    
                            Style
                            2307
                        
                            Multiple Conductor with Extruded Insulation and Extruded Internal Jacket
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			Conductor22 AWG, 18 AWG, each consisting of No. 30 AWG strands.
		
			InsulationPVC, 30 mils min average, 27 mils minimum at any point.
		
			AssemblyFive conductors A and B, No. 22 AWG, C No. 16 AWG, D and E No. 18 AWG ; A, B, D, and E same as for Type SJT cord;C - bare. A, B, and C twisted together with fillers in a 1-in. lay with an outerwrap of conductive cotton yarn. The above subassembly cabled with D and E and fillers in a 3.5-in. lay. A paper wrap is applied over the conductor assembly.
		
			JacketExtruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use with electric organs.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2307	Issued:1960-01-05
			Revised:2012-04-17


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	22 AWG, 18 AWG, each consisting of No. 30 AWG strands.

Insulation	PVC, 30 mils min average, 27 mils minimum at any point.

Assembly	Five conductors A and B, No. 22 AWG, C No. 16 AWG, D and E No. 18 AWG ; A, B, D, and E same as for Type SJT cord;C - bare. A, B, and C twisted together with fillers in a 1-in. lay with an outerwrap of conductive cotton yarn. The above subassembly cabled with D and E and fillers in a 3.5-in. lay. A paper wrap is applied over the conductor assembly.

Jacket	Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use with electric organs.