UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2310
                        
                            Issued:1960-05-10
                    
                            Revised:2013-01-30
                    
                            Style
                            2310
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating80 deg C, 600 Vac, Horizontal flame.
		
			Conductor22 AWG - 16 AWG, solid or stranded.
		
			InsulationExtruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point.
		
			AssemblyTwo conductors.
		
			ShieldA conductive thermoplastic material 7 mils nominal thickness, 6 mils minimum wall thickness at any point, in conjunction with a 20 or 22 AWG, stranded or solid, tinned or bare bonding conductor. The shield may also be a wrap of aluminum faced "Polyester" tape with a parallel uninsulated drain wire. The shield may be applied over one or both conductors.
		
			JacketExtruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point. The color of the jacket shall be other than black.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2310	Issued:1960-05-10
			Revised:2013-01-30


Rating	80 deg C, 600 Vac, Horizontal flame.

Conductor	22 AWG - 16 AWG, solid or stranded.

Insulation	Extruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point.

Assembly	Two conductors.

Shield	A conductive thermoplastic material 7 mils nominal thickness, 6 mils minimum wall thickness at any point, in conjunction with a 20 or 22 AWG, stranded or solid, tinned or bare bonding conductor. The shield may also be a wrap of aluminum faced "Polyester" tape with a parallel uninsulated drain wire. The shield may be applied over one or both conductors.

Jacket	Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point. The color of the jacket shall be other than black.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.