UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2314
                        
                            Issued:1960-07-05
                    
                            Revised:2012-03-09
                    
                            Style
                            2314
                        
                            Mutiple-Conductor cable using non-integral jacket.
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			Conductor22 AWG - 16 AWG, each consisting of No. 30 AWG or smaller tinned copper strands.
		
			InsulationExtruded PVC. 15 mils minimum average thickness, 13 mils minimum thickness at any point.
		
			AssemblyFive conductors; All conductors shall be provided with a lacquered rayon braid. A, B, and C, shall have a nominal 15 mil wall, D and E shall have a nominal 30 mil wall, otherwise same as Type SJT Cord. Conductors A, B, and C shall be provided with a copper braid shield (six No. 40 AWG strands in each of sixteen carriers, eighteen picks per inch). Shielded conductors A, B, and C shall be cabled with a 3-1/2 inch left-hand lay; unshielded conductors D and E shall be twisted together with cotton or jute fillers and a 3-1/2 inch right-hand lay. The two groups shall be twisted together with a 3-1/2 inch lay using cotton or jute fillers. A cotton serve shall be applied over the conductor assembly.
		
			JacketExtruded PVC. 60 mils minimum average thickness, 48 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use with Electric Organs.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2314	Issued:1960-07-05
			Revised:2012-03-09


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	22 AWG - 16 AWG, each consisting of No. 30 AWG or smaller tinned copper strands.

Insulation	Extruded PVC. 15 mils minimum average thickness, 13 mils minimum thickness at any point.

Assembly	Five conductors; All conductors shall be provided with a lacquered rayon braid. A, B, and C, shall have a nominal 15 mil wall, D and E shall have a nominal 30 mil wall, otherwise same as Type SJT Cord. Conductors A, B, and C shall be provided with a copper braid shield (six No. 40 AWG strands in each of sixteen carriers, eighteen picks per inch). Shielded conductors A, B, and C shall be cabled with a 3-1/2 inch left-hand lay; unshielded conductors D and E shall be twisted together with cotton or jute fillers and a 3-1/2 inch right-hand lay. The two groups shall be twisted together with a 3-1/2 inch lay using cotton or jute fillers. A cotton serve shall be applied over the conductor assembly.

Jacket	Extruded PVC. 60 mils minimum average thickness, 48 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use with Electric Organs.