UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2322
                        
                            Issued:1960-11-23
                    
                            Revised:2012-07-11
                    
                            Style
                            2322
                        
                            Multiconductor with Extruded Insulated Singles and Extruded Non-Integral Jacket.
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			ConductorFive to Ten Conductors, No. 18 or 20 AWG employing individual copper strands of No. 36 AWG. 65/No. 36 or 41/No. 36, respectively.
		
			InsulationExtruded PVC, 30 mils min average, 27 mils minimum at any point.
		
			AssemblyFive to ten conductors, similar to Type SJT in UL62.
		
			JacketExtruded PVC, 30 mils min average, 24 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring or Internal Wiring for couches and hospital beds.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2322	Issued:1960-11-23
			Revised:2012-07-11


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	Five to Ten Conductors, No. 18 or 20 AWG employing individual copper strands of No. 36 AWG. 65/No. 36 or 41/No. 36, respectively.

Insulation	Extruded PVC, 30 mils min average, 27 mils minimum at any point.

Assembly	Five to ten conductors, similar to Type SJT in UL62.

Jacket	Extruded PVC, 30 mils min average, 24 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring or Internal Wiring for couches and hospital beds.