UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2330
                        
                            Issued:1961-06-15
                    
                            Revised:2011-09-28
                    
                            Style
                            2330
                        
                            Parallel cable with extruded integral insulation and jacket.
                    
			Rating105 deg C, 600 Vac, FT2 flame, Oil Resistant 60 deg C or 80 deg C (opt), Moisture Resist 60 deg C
		
			Conductor18 or 16 AWG consisting of 30 AWG or smaller tinned or bare copper.
		
			InsulationIntegral with Jacket. PVC, 60 mils min average, 54 mils minimum at any point.
		
			AssemblyThree conductors. Same as for Type SPT-3, except for a nominal 60 mil wall, the following minimum (pin gauge) dimensions: Wall thickness: 0.058 in., Web thickness: 0.141 in., Wall after rip: 0.058 in..
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Electric Refrigerators or Room Cooler Units where ripped not more than 15 inches and where exposed to temperatures not exceeding 105 deg C. Tag may also add: where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable); Moisture Resistant, 60 deg C. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2330	Issued:1961-06-15
			Revised:2011-09-28


Rating	105 deg C, 600 Vac, FT2 flame, Oil Resistant 60 deg C or 80 deg C (opt), Moisture Resist 60 deg C

Conductor	18 or 16 AWG consisting of 30 AWG or smaller tinned or bare copper.

Insulation	Integral with Jacket. PVC, 60 mils min average, 54 mils minimum at any point.

Assembly	Three conductors. Same as for Type SPT-3, except for a nominal 60 mil wall, the following minimum (pin gauge) dimensions: Wall thickness: 0.058 in., Web thickness: 0.141 in., Wall after rip: 0.058 in..

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Electric Refrigerators or Room Cooler Units where ripped not more than 15 inches and where exposed to temperatures not exceeding 105 deg C. Tag may also add: where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable); Moisture Resistant, 60 deg C. Polarity identification may be omitted.