UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2340
                        
                            Issued:1962-06-11
                    
                            Revised:2012-07-26
                    
                            Style
                            2340
                        
                            Multi-conductor Cable with Extruded Non-Integral Jacket.
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor18 AWG stranded, each consisting of 30 AWG strands.
		
			InsulationExtruded PVC, 15 mils min average, 13 mils minimum at any point. A, B, C, and D 30 mil wall, Style 1011; E and F 15 mil wall, Style 1007.
		
			AssemblySix conductors.  Conductors A, B, C, and D twisted together around core with fillers in a 5 inches lay with cotton serving.  Conductors E and F twisted together for core in a 1 inch lay.  Style 1011 for Conductors A, B, C, and D;  Style 1007 for Conductors E and F.
		
			FillerCotton.
		
			JacketExtruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use with Electric Organs.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2340	Issued:1962-06-11
			Revised:2012-07-26


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	18 AWG stranded, each consisting of 30 AWG strands.

Insulation	Extruded PVC, 15 mils min average, 13 mils minimum at any point. A, B, C, and D 30 mil wall, Style 1011; E and F 15 mil wall, Style 1007.

Assembly	Six conductors. Conductors A, B, C, and D twisted together around core with fillers in a 5 inches lay with cotton serving. Conductors E and F twisted together for core in a 1 inch lay. Style 1011 for Conductors A, B, C, and D; Style 1007 for Conductors E and F.

Filler	Cotton.

Jacket	Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use with Electric Organs.