UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2344
                        
                            Issued:1962-09-24
                    
                            Revised:2011-09-08
                    
                            Style
                            2344
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, Voltage not specified, Cable flame.
		
			Conductor30 AWG min., stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional. Extruded PVC, 6 mils minimum thickness, applied over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC, Dia 1.500 or less, 80 mils min average, 64 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of computers and electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2344	Issued:1962-09-24
			Revised:2011-09-08


Rating	80 deg C, Voltage not specified, Cable flame.

Conductor	30 AWG min., stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional. Extruded PVC, 6 mils minimum thickness, applied over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC, Dia 1.500 or less, 80 mils min average, 64 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of computers and electronic equipment.