UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2345
                        
                            Issued:1962-09-24
                    
                            Revised:2013-01-08
                    
                            Style
                            2345
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, voltage rating not specified, Cable flame.
		
			Insulated Conductor30 AWG minimum, stranded. Labeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional. Extruded PVC, 6 mils minimum thickness, applied over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Diameter of cable under jacket*Minimum average thicknessMinimum thickness at any point
		
			1.501-2.500 inch110 mils88 mils
		
			* - Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of computers and electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2345	Issued:1962-09-24
			Revised:2013-01-08


Rating	80 deg C, voltage rating not specified, Cable flame.

Insulated Conductor	30 AWG minimum, stranded. Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional. Extruded PVC, 6 mils minimum thickness, applied over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC.
	Diameter of cable under jacket*	Minimum average thickness	Minimum thickness at any point
	1.501-2.500 inch	110 mils	88 mils
	* - Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of computers and electronic equipment.