UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2348
                        
                            Issued:1962-11-14
                    
                            Revised:2012-03-29
                    
                            Style
                            2348
                        
                            Parallel cable with extruded integral insulation.
                    
			Rating90 deg C, 600 Vac, Horizontal flame.
		
			Conductor22 AWG consisting of 7 No. 30 AWG copper strands, tinned or bare.
		
			InsulationExtruded PVC, 28 mils min average, 25 mils minimum at any point.
		
			AssemblyTwo conductor, same as type SPT-1, except for a nominal 80 mils separation between conductors, the following minimum dimensions shall apply: Wall thickness: 0.028 in., Web thickness: 0.080 in., Wall after rip: 0.028 in..
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Electronic Equipment where exposed to temperature not exceeding 90 deg C.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2348	Issued:1962-11-14
			Revised:2012-03-29


Rating	90 deg C, 600 Vac, Horizontal flame.

Conductor	22 AWG consisting of 7 No. 30 AWG copper strands, tinned or bare.

Insulation	Extruded PVC, 28 mils min average, 25 mils minimum at any point.

Assembly	Two conductor, same as type SPT-1, except for a nominal 80 mils separation between conductors, the following minimum dimensions shall apply: Wall thickness: 0.028 in., Web thickness: 0.080 in., Wall after rip: 0.028 in..

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Electronic Equipment where exposed to temperature not exceeding 90 deg C.