UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2363
                        
                            Issued:1963-06-18
                    
                            Revised:2012-07-31
                    
                            Style
                            2363
                        
                            Parallel cable with extruded integral insulation and jacket
                    
			Rating60 deg C, no voltage assigned, FT2 flame, 60 deg C wet, Sunlight resistant.
		
			Conductor12 AWG - 8 AWG, consisting of 30 AWG strands
		
			InsulationExtruded PVC, integral with jacket  See Facing Page for compound designation, or shall use any of the Recognized Component (QMTT2) 720 h Sunlight-Resistant PVC insulation and jacket compounds.
		
			Conductor sizeMinimum average thicknessMinimum thickness at any pointMinimum web thickness
		
			12 AWG60 mils54 mils72 mils
		
			10-8 AWG80 mils72 mils72 mils
		
			AssemblyTwo conductors, same as Type SPT-3 flexible cord except rippable web is optional.  If provided, groove depth is approx 45 mils and width is approx 30 mils, or may include a "V" groove where the minimum thickness at bottom of groove is 5 mils.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseLow voltage outdoor application in lighting fixtures. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2363	Issued:1963-06-18
			Revised:2012-07-31


Rating	60 deg C, no voltage assigned, FT2 flame, 60 deg C wet, Sunlight resistant.

Conductor	12 AWG - 8 AWG, consisting of 30 AWG strands

Insulation	Extruded PVC, integral with jacket See Facing Page for compound designation, or shall use any of the Recognized Component (QMTT2) 720 h Sunlight-Resistant PVC insulation and jacket compounds.
	Conductor size	Minimum average thickness	Minimum thickness at any point	Minimum web thickness
	12 AWG	60 mils	54 mils	72 mils
	10-8 AWG	80 mils	72 mils	72 mils

Assembly	Two conductors, same as Type SPT-3 flexible cord except rippable web is optional. If provided, groove depth is approx 45 mils and width is approx 30 mils, or may include a "V" groove where the minimum thickness at bottom of groove is 5 mils.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Low voltage outdoor application in lighting fixtures. Polarity identification may be omitted.