UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2368
                        
                            Issued:1963-09-10
                    
                            Revised:2012-03-09
                    
                            Style
                            2368
                        
                            Parallel Cable with Extruded Integral Insulation and Jacket
                    
			Rating60, 80 deg C, 300 Vac, FT2 flame, Oil Res 60 or 80 deg C (optional), Moisture Res 60 deg C
		
			Conductor18 AWG - 16 AWG consisting of 30 AWG or smaller stranded, tinned or bare.
		
			InsulationIntegral with Jacket. Extruded PVC, 60 mils minimum average thickness, 54 mils minimum thickness at any point.
		
			AssemblyThree conductors, same as type SPT-3.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electric refrigerators or of gas- or oil-fired domestic heating equipment or  where exposed to oil at temperatures not exceeding 60 deg C or 80 deg C (whichever is applicable); Moisture Resistant, 60 deg C. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2368	Issued:1963-09-10
			Revised:2012-03-09


Rating	60, 80 deg C, 300 Vac, FT2 flame, Oil Res 60 or 80 deg C (optional), Moisture Res 60 deg C

Conductor	18 AWG - 16 AWG consisting of 30 AWG or smaller stranded, tinned or bare.

Insulation	Integral with Jacket. Extruded PVC, 60 mils minimum average thickness, 54 mils minimum thickness at any point.

Assembly	Three conductors, same as type SPT-3.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electric refrigerators or of gas- or oil-fired domestic heating equipment or where exposed to oil at temperatures not exceeding 60 deg C or 80 deg C (whichever is applicable); Moisture Resistant, 60 deg C. Polarity identification may be omitted.