UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2369
                        
                            Issued:1963-09-10
                    
                            Revised:2011-09-30
                    
                            Style
                            2369
                        
                            Parallel Cable with Extruded Integral Insulation.
                    
			Rating80 deg C, 600 Vac, FT2 flame, 60 deg C Wet.  Optional - 60 or 80 deg C Oil.
		
			Conductor14, 12 or 10 AWG stranded, consisting of 30 AWG or smaller strands.
		
			InsulationExtruded PVC, nomimal 80 mils wall thickness, the following minimum thickness (pin gauge) dimensions: Wall thickness: 70 mils, Web thickness: 141 mils, Wall after rip: 58 mils.
		
			AssemblyTwo conductors, same as type SPT-3.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of room cooler units where exposed to temperatures not exceeding 80 deg C; or ditto where exposed to oil at a temperature not exceeding 60 deg C or 80 deg C (whichever is applicable); Moisture Resistant, 60 deg C.  Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2369	Issued:1963-09-10
			Revised:2011-09-30


Rating	80 deg C, 600 Vac, FT2 flame, 60 deg C Wet. Optional - 60 or 80 deg C Oil.

Conductor	14, 12 or 10 AWG stranded, consisting of 30 AWG or smaller strands.

Insulation	Extruded PVC, nomimal 80 mils wall thickness, the following minimum thickness (pin gauge) dimensions: Wall thickness: 70 mils, Web thickness: 141 mils, Wall after rip: 58 mils.

Assembly	Two conductors, same as type SPT-3.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of room cooler units where exposed to temperatures not exceeding 80 deg C; or ditto where exposed to oil at a temperature not exceeding 60 deg C or 80 deg C (whichever is applicable); Moisture Resistant, 60 deg C. Polarity identification may be omitted.