UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2370
                        
                            Issued:1963-09-10
                    
                            Revised:2011-12-21
                    
                            Style
                            2370
                        
                            Parallel cable with extruded integral insulation and jacket
                    
			Rating80 deg C, 600 Vac, FT2 flame, Oil Res 60 or 80 deg C (optional), Moisture Res 60 deg C
		
			ConductorThree No. 14, 12 or 10 AWG consisting of 30 AWG or smaller tinned or bare copper.
		
			InsulationIntegral with Jacket. PVC, nomimal 80 mil wall, the following minimum (pin gauge) dimensions: Wall thickness: 0.070 in., Web thickness: 0.141 in., Wall after rip: 0.058 in..
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of room cooler units where exposed to temperature not exceeding 80 deg C; or where exposed to oil at a temperature not exceeding 60 deg C or 80 deg C; (whichever is applicable); Moisture Resistant, 60 deg C. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2370	Issued:1963-09-10
			Revised:2011-12-21


Rating	80 deg C, 600 Vac, FT2 flame, Oil Res 60 or 80 deg C (optional), Moisture Res 60 deg C

Conductor	Three No. 14, 12 or 10 AWG consisting of 30 AWG or smaller tinned or bare copper.

Insulation	Integral with Jacket. PVC, nomimal 80 mil wall, the following minimum (pin gauge) dimensions: Wall thickness: 0.070 in., Web thickness: 0.141 in., Wall after rip: 0.058 in..

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of room cooler units where exposed to temperature not exceeding 80 deg C; or where exposed to oil at a temperature not exceeding 60 deg C or 80 deg C; (whichever is applicable); Moisture Resistant, 60 deg C. Polarity identification may be omitted.