UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2373
                        
                            Issued:1963-12-09
                    
                            Revised:2011-10-28
                    
                            Style
                            2373
                        
                            Multiple-conductor cable with non-integral jacket
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor26 AWG - 16 AWG solid or stranded.
		
			InsulationExtruded PE or extruded FRPE, 16 mils min average, 13 mils minimum at any point.
		
			AssemblyTwo conductors.
		
			CoveringOptional, lacquered glass or rayon over one or both conductors.
		
			ShieldShielding over one or both conductors may consist of 38-30 AWG tinned copper strands applied as a wrap or braid, or equivalent, conductive thermoplastic with drain wire, or aluminum-faced Mylar with drain wire. Uninsulated drain wire optional where not specified.
		
			JacketExtruded PVC, 16 mils min average, 13 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral. When used, "Conductive PVC Shield" required in contrasting color at intervals of two feet or less.
		
			UseFor Electronic Use In Non-Hazardous Locations or Phonograph Pick-up Cable. When used, "Conductive PVC Shield" required in contrasting color at intervals of two feet or less.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2373	Issued:1963-12-09
			Revised:2011-10-28


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	26 AWG - 16 AWG solid or stranded.

Insulation	Extruded PE or extruded FRPE, 16 mils min average, 13 mils minimum at any point.

Assembly	Two conductors.

Covering	Optional, lacquered glass or rayon over one or both conductors.

Shield	Shielding over one or both conductors may consist of 38-30 AWG tinned copper strands applied as a wrap or braid, or equivalent, conductive thermoplastic with drain wire, or aluminum-faced Mylar with drain wire. Uninsulated drain wire optional where not specified.

Jacket	Extruded PVC, 16 mils min average, 13 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General. When used, "Conductive PVC Shield" required in contrasting color at intervals of two feet or less.

Use	For Electronic Use In Non-Hazardous Locations or Phonograph Pick-up Cable. When used, "Conductive PVC Shield" required in contrasting color at intervals of two feet or less.