UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2375
                        
                            Issued:1964-01-10
                    
                            Revised:2012-04-13
                    
                            Style
                            2375
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, 300 Vac, FT2 flame.
		
			Conductor22 AWG - 18 AWG each consisting of 30 AWG tinned copper strands.
		
			InsulationExtruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point. Alternative for conductors A and B: 1/32 in. polyethylene.
		
			ShieldConductive cotton wrap applied helically over twisted assembly of drain wire, fillers, and conductors A and B. In lieu of the conductive cotton wrap, one of the following shielding tapes may be employed. Laminated tape, consisting of 0.00035 in. aluminum foil, 0.001 in. "Polyester" tape, 0.00035 in. aluminum foil. Laminated tape, consisting of 0.00035 in. aluminum foil, 0.0005 or 0.001 or 0.002 in. "Polyester" tape. Laminated tape, consisting of 0.00035 in. aluminum foil, No. 150 1/0 fiberglas yarn reinforcement, 0.0005 in. "Polyester" tape.
		
			AssemblyFour conductors, A and B No. 22 AWG; C and D No. 18 AWG; drain wire No. 16 AWG. The shielded group of conductors is twisted together with conductors C and D and fillers, and a wrap of cotton, paper tape, or Mylar tape is applied.
		
			JacketExtruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use with electric organs.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2375	Issued:1964-01-10
			Revised:2012-04-13


Rating	60 deg C, 300 Vac, FT2 flame.

Conductor	22 AWG - 18 AWG each consisting of 30 AWG tinned copper strands.

Insulation	Extruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point. Alternative for conductors A and B: 1/32 in. polyethylene.

Shield	Conductive cotton wrap applied helically over twisted assembly of drain wire, fillers, and conductors A and B. In lieu of the conductive cotton wrap, one of the following shielding tapes may be employed. Laminated tape, consisting of 0.00035 in. aluminum foil, 0.001 in. "Polyester" tape, 0.00035 in. aluminum foil. Laminated tape, consisting of 0.00035 in. aluminum foil, 0.0005 or 0.001 or 0.002 in. "Polyester" tape. Laminated tape, consisting of 0.00035 in. aluminum foil, No. 150 1/0 fiberglas yarn reinforcement, 0.0005 in. "Polyester" tape.

Assembly	Four conductors, A and B No. 22 AWG; C and D No. 18 AWG; drain wire No. 16 AWG. The shielded group of conductors is twisted together with conductors C and D and fillers, and a wrap of cotton, paper tape, or Mylar tape is applied.

Jacket	Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use with electric organs.