UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2385
                        
                            Issued:1964-03-24
                    
                            Revised:2013-01-10
                    
                            Style
                            2385
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, 30 Vac, Cable flame.
		
			Insulated Conductor40 AWG minimum. Labeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional, extruded PVC, 6 mils minimum thickness at any point, over conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Diameter of core assembly under jacket*Minimum average thicknessMinimum thickness at any point
		
			0.700 inch or less60 mils48 mils
		
			* - Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or external wiring in Class 2 circuits of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2385	Issued:1964-03-24
			Revised:2013-01-10


Rating	60 deg C, 30 Vac, Cable flame.

Insulated Conductor	40 AWG minimum. Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional, extruded PVC, 6 mils minimum thickness at any point, over conductor assembly.

Shield	Optional.

Jacket	Extruded PVC.
	Diameter of core assembly under jacket*	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	60 mils	48 mils
	* - Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or external wiring in Class 2 circuits of electronic equipment.