UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2387
                        
                            Issued:1964-03-24
                    
                            Revised:2011-10-02
                    
                            Style
                            2387
                        
                            Jacketed Cable.
                    
			Rating60 deg C, 30 Vac, Cable flame.
		
			Conductor40 AWG - 10 AWG solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo or more conducts, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			Covering(Optional) A 6 mil or heavier PVC covering may be extruded over one or more groups of conductors.
		
			JacketPVC, Dia 1.501-2.500, 110 mils min average, 88 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection in Class 2 circuits of computers and electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2387	Issued:1964-03-24
			Revised:2011-10-02


Rating	60 deg C, 30 Vac, Cable flame.

Conductor	40 AWG - 10 AWG solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Two or more conducts, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	(Optional) A 6 mil or heavier PVC covering may be extruded over one or more groups of conductors.

Jacket	PVC, Dia 1.501-2.500, 110 mils min average, 88 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection in Class 2 circuits of computers and electronic equipment.