UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2388
                        
                            Issued:1964-03-24
                    
                            Revised:2012-07-26
                    
                            Style
                            2388
                        
                            Multiple conductor cable using non-integral jacket.
                    
			Rating60 deg C, 30 Vac, Cable flame.
		
			Conductor40 AWG - 10 AWG solid or stranded round.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo or more conducts, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			Covering(Optional) A 6 mil or heavier extruded PVC covering may be extruded over one or more groups of conductors.
		
			JacketExtruded PVC, Dia 2.501 and larger, 140 mils min average, 112 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection in Class 2 circuits of computers and electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2388	Issued:1964-03-24
			Revised:2012-07-26


Rating	60 deg C, 30 Vac, Cable flame.

Conductor	40 AWG - 10 AWG solid or stranded round.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Two or more conducts, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	(Optional) A 6 mil or heavier extruded PVC covering may be extruded over one or more groups of conductors.

Jacket	Extruded PVC, Dia 2.501 and larger, 140 mils min average, 112 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection in Class 2 circuits of computers and electronic equipment.