UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2395
                        
                            Issued:1964-06-29
                    
                            Revised:2011-08-11
                    
                            Style
                            2395
                        
                            Multiple-Conductor Cable with Extruded Insulation and Extruded Non-Integral Jacket
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor22 AWG - 16 AWG, stranded
		
			InsulationExtruded PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point. 
Conductors A, B, and C shall have a nominal 15 mil wall; Conductors D and E shall have a nominal 30 mil wall, otherwise same as Type SJT Cord.
		
			AssemblyFive conductors. A, B, and C - No. 22 AWG; D and E - No. 16 AWG.  All may be provided with a lacquered rayon braid. Conductors A, B, and C shall be provided with a copper braid shield (six 40 AWG strands in each of sixteen carriers, eighteen picks per inch). Shielded conductors A, B, and C shall be cabled with a 3-1/2 inch left-hand lay; unshielded conductors D and E shall be twisted together in a 3-1/2 inch right-hand lay. The two groups shall be twisted together with a 3-1/2 inch lay.
		
			JacketExtruded PVC, 60 mils minimum average thickness, 48 mils minimum thickness at any point, except type SJT cord.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use with Electric Organs.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2395	Issued:1964-06-29
			Revised:2011-08-11


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	22 AWG - 16 AWG, stranded

Insulation	Extruded PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point. Conductors A, B, and C shall have a nominal 15 mil wall; Conductors D and E shall have a nominal 30 mil wall, otherwise same as Type SJT Cord.

Assembly	Five conductors. A, B, and C - No. 22 AWG; D and E - No. 16 AWG. All may be provided with a lacquered rayon braid. Conductors A, B, and C shall be provided with a copper braid shield (six 40 AWG strands in each of sixteen carriers, eighteen picks per inch). Shielded conductors A, B, and C shall be cabled with a 3-1/2 inch left-hand lay; unshielded conductors D and E shall be twisted together in a 3-1/2 inch right-hand lay. The two groups shall be twisted together with a 3-1/2 inch lay.

Jacket	Extruded PVC, 60 mils minimum average thickness, 48 mils minimum thickness at any point, except type SJT cord.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use with Electric Organs.