UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2422
                        
                            Issued:1966-03-04
                    
                            Revised:2012-07-10
                    
                            Style
                            2422
                        
                            Single or multiple conductor with extruded insulation.
                    
			Rating90 deg C, 600 Vac, Cable flame, Oil Resistant 60 deg C, Moisture Resistant 60 deg C
		
			Conductor50 AWG - 10 AWG solid or stranded round.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			Covering(Optional) A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketPVC, 45 mils min average.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of appliances or electronic equipment at temperatures not exceeding 90 deg C dry, 60 deg C wet, and 60 deg C in oil.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2422	Issued:1966-03-04
			Revised:2012-07-10


Rating	90 deg C, 600 Vac, Cable flame, Oil Resistant 60 deg C, Moisture Resistant 60 deg C

Conductor	50 AWG - 10 AWG solid or stranded round.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	(Optional) A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	PVC, 45 mils min average.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of appliances or electronic equipment at temperatures not exceeding 90 deg C dry, 60 deg C wet, and 60 deg C in oil.