UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2423
                        
                            Issued:1966-03-04
                    
                            Revised:2012-07-06
                    
                            Style
                            2423
                        
                            Multiple Conductor Cable with Extruded Non-integral Jacket.
                    
			Rating90 deg C, 600 Vac, Cable flame, Oil Resistant 60 deg C, Moisture Resistant 60 deg C
		
			InsulationLabeled or complying with this Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			Covering(Optional) A 6 mil or extruded heavier PVC covering may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC, 60 mils min average, 48 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of appliance or electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2423	Issued:1966-03-04
			Revised:2012-07-06


Rating	90 deg C, 600 Vac, Cable flame, Oil Resistant 60 deg C, Moisture Resistant 60 deg C

Insulation	Labeled or complying with this Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	(Optional) A 6 mil or extruded heavier PVC covering may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC, 60 mils min average, 48 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of appliance or electronic equipment.