UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2425
                        
                            Issued:1966-03-04
                    
                            Revised:2012-07-16
                    
                            Style
                            2425
                        
                            Multiple-conductor Cable using nonintegral jacket.
                    
			Rating90 deg C, 600 Vac, Cable flame, Oil Resistant 60 deg C , Moisture Resistant 60 deg C
		
			InsulationLabeled AWM or singles complying with this manufacturer's AWM Procedure.
		
			AssemblyTwo or more conductors. Two conductor cable may be flat or twisted. If more than one group is used, groups shall be twisted together. (The length of lay of the twisted conductors or groups is not specified). Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap, serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketExtruded PVC, 110 mils min average, 88 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal and internal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2425	Issued:1966-03-04
			Revised:2012-07-16


Rating	90 deg C, 600 Vac, Cable flame, Oil Resistant 60 deg C , Moisture Resistant 60 deg C

Insulation	Labeled AWM or singles complying with this manufacturer's AWM Procedure.

Assembly	Two or more conductors. Two conductor cable may be flat or twisted. If more than one group is used, groups shall be twisted together. (The length of lay of the twisted conductors or groups is not specified). Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap, serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	Extruded PVC, 110 mils min average, 88 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External and internal wiring.