UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2426
                        
                            Issued:1966-03-04
                    
                            Revised:2012-07-10
                    
                            Style
                            2426
                        
                            Single or multiple conductor with extruded insulation.
                    
			Rating90 deg C, 600 Vac, Cable flame, Oil Resistant 60 deg C, Moisture Resistant 60 deg C
		
			Conductor50 AWG - 10 AWG solid or stranded round.
		
			InsulationLabeled AWM or singles complying with this Manufacturer's AWM Procedure.
		
			AssemblyTwo or more conductors. Two conductor cable may be flat or twisted. If more than one group is used, groups shall be twisted together. (The length of lay of the twisted conductors or groups is not specified). Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap, serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketPVC, 140 mils min average.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of appliance or electronic equipment at temperatures not exceeding 90 deg C dry, 60 deg C wet, and 60 deg C in oil.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2426	Issued:1966-03-04
			Revised:2012-07-10


Rating	90 deg C, 600 Vac, Cable flame, Oil Resistant 60 deg C, Moisture Resistant 60 deg C

Conductor	50 AWG - 10 AWG solid or stranded round.

Insulation	Labeled AWM or singles complying with this Manufacturer's AWM Procedure.

Assembly	Two or more conductors. Two conductor cable may be flat or twisted. If more than one group is used, groups shall be twisted together. (The length of lay of the twisted conductors or groups is not specified). Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap, serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	PVC, 140 mils min average.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of appliance or electronic equipment at temperatures not exceeding 90 deg C dry, 60 deg C wet, and 60 deg C in oil.