UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2431
                        
                            Issued:1966-07-14
                    
                            Revised:2012-04-25
                    
                            Style
                            2431
                        
                            Multi-conductor Cable with Extruded Non-Integral Jacket.
                    
			Rating60 deg C, 300 Vac, horizontal flame.
		
			Conductor22 AWG - 18 AWG stranded copper.
		
			InsulationLabeled Style 1007 and Type TFF.
		
			AssemblySix conductors. Style 1007 are paired and each pair twisted together. The pair of Style 1007 wires twisted together with the pair of Type TFF wires. The assembly twisted together with a lay of conductors of 3.5 in. A cotton filler is provided through the center of the assembly. Over the assembly is PVC material to fill the valleys between conductors. Individual conductor insulations may be colored for circuit identification.
		
			FillerRequired.  Cotton.
		
			JacketExtruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use as connection of a power pack unit to a portable television receiver where exposed to temperatures not exceeding 60 deg C, and the maximum length should not exceed 18 inches.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2431	Issued:1966-07-14
			Revised:2012-04-25


Rating	60 deg C, 300 Vac, horizontal flame.

Conductor	22 AWG - 18 AWG stranded copper.

Insulation	Labeled Style 1007 and Type TFF.

Assembly	Six conductors. Style 1007 are paired and each pair twisted together. The pair of Style 1007 wires twisted together with the pair of Type TFF wires. The assembly twisted together with a lay of conductors of 3.5 in. A cotton filler is provided through the center of the assembly. Over the assembly is PVC material to fill the valleys between conductors. Individual conductor insulations may be colored for circuit identification.

Filler	Required. Cotton.

Jacket	Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use as connection of a power pack unit to a portable television receiver where exposed to temperatures not exceeding 60 deg C, and the maximum length should not exceed 18 inches.