UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2438
                        
                            Issued:1966-10-27
                    
                            Revised:2012-04-16
                    
                            Style
                            2438
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			ConductorTinsel conductors composed of six strands, each strand having two cadmium copper ribbons (rolled from No. 40 AWG wire). The two cadmium copper ribbons shall be wound around a Fortesan yarn core and all six strands cabled around a center core of Fortesan yarn. Conductor covered with a braid of nylon or cotton.
		
			InsulationExtruded PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point.
		
			AssemblyThree conductos, same as type SVT, but with a lay of twist opposite in direction to the direction in which the helical cord is wound.
		
			JacketExtruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point. The cord is heat treated while coiled in a helical shape on a mandrel. When the helix is stretched out and released, the cord returns to its helical form because of the elasticity of the jacket.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2438	Issued:1966-10-27
			Revised:2012-04-16


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	Tinsel conductors composed of six strands, each strand having two cadmium copper ribbons (rolled from No. 40 AWG wire). The two cadmium copper ribbons shall be wound around a Fortesan yarn core and all six strands cabled around a center core of Fortesan yarn. Conductor covered with a braid of nylon or cotton.

Insulation	Extruded PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point.

Assembly	Three conductos, same as type SVT, but with a lay of twist opposite in direction to the direction in which the helical cord is wound.

Jacket	Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point. The cord is heat treated while coiled in a helical shape on a mandrel. When the helix is stretched out and released, the cord returns to its helical form because of the elasticity of the jacket.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.