UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2442
                        
                            Issued:1967-03-30
                    
                            Revised:2012-10-03
                    
                            Style
                            2442
                        
                            Parallel Cable with Extruded Integral Insulation and Jacket
                    
			Rating80 deg C, 300 Vac, FT2 flame, Oil Resistant 60 deg C or 80 deg C, Moisture Resistant 60 deg C
		
			Conductor18 AWG stranded , tinned or bare copper, consisting of 7/.0152 or 30 AWG or smaller stranding.
		
			InsulationIntegral with Jacket. PVC, 45 mils min average, 40 mils minimum at any point.
		
			AssemblyThree conductors, same as type SPT-2.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral. When 7/.0152 stranding is employed, the tag marking shall also indicate the following, "where not subjected to flexing".
		
			Use"Internal Wiring of Signal Alarm Equipment where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable); Moisture Resistant 60 deg C."
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2442	Issued:1967-03-30
			Revised:2012-10-03


Rating	80 deg C, 300 Vac, FT2 flame, Oil Resistant 60 deg C or 80 deg C, Moisture Resistant 60 deg C

Conductor	18 AWG stranded , tinned or bare copper, consisting of 7/.0152 or 30 AWG or smaller stranding.

Insulation	Integral with Jacket. PVC, 45 mils min average, 40 mils minimum at any point.

Assembly	Three conductors, same as type SPT-2.

Standard	Appliance Wiring Material UL 758.

Marking	General. When 7/.0152 stranding is employed, the tag marking shall also indicate the following, "where not subjected to flexing".

Use	"Internal Wiring of Signal Alarm Equipment where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable); Moisture Resistant 60 deg C."