UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2443
                        
                            Issued:1967-03-30
                    
                            Revised:2012-07-05
                    
                            Style
                            2443
                        
                            Parallel cable with extruded integral insulation and jacket.
                    
			Rating80 deg C, 300 Vac, FT2 flame, Oil Resistant 60 deg C or 80 deg C, Moisture Resistant 60 deg C
		
			Conductor18 AWG solid or stranded round, consisting of 7/.0152 or 30 AWG or smaller strandings.
		
			InsulationExtruded integral PVC insulation and jacket, 45 mils min average, 40 mils minimum at any point.
		
			AssemblyTwo conductors, same as type SPT-2.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral. When 7/.0152 stranding is employed, the tag marking shall also indicate the following, "where not subjected to flexing".
		
			Use"Internal Wiring of Signal Alarm Equipment where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable); Moisture Resistant 60 deg C."
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2443	Issued:1967-03-30
			Revised:2012-07-05


Rating	80 deg C, 300 Vac, FT2 flame, Oil Resistant 60 deg C or 80 deg C, Moisture Resistant 60 deg C

Conductor	18 AWG solid or stranded round, consisting of 7/.0152 or 30 AWG or smaller strandings.

Insulation	Extruded integral PVC insulation and jacket, 45 mils min average, 40 mils minimum at any point.

Assembly	Two conductors, same as type SPT-2.

Standard	Appliance Wiring Material UL 758.

Marking	General. When 7/.0152 stranding is employed, the tag marking shall also indicate the following, "where not subjected to flexing".

Use	"Internal Wiring of Signal Alarm Equipment where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable); Moisture Resistant 60 deg C."