UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2461
                        
                            Issued:1968-03-01
                    
                            Revised:2012-04-23
                    
                            Style
                            2461
                        
                            Multi-conductor cable with extruded non-integral jacket.
                    
			Rating80 deg C, 300 Vac, Horizontal flame, Construction A, Cable flame, construction B.
		
			InsulationLabeled or complying with the AWM manufacturer's Procedure.
		
			AssemblyTwo or more insulated conductors, twisted pairs or groups twisted conductors twisted together.  The insulated conductors or groups of insulated conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. A 6 mils or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC.
		
			Diameter of core assembly under jacketConstructionMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or lessA30 mils24 mils
		
			0.700 inch or lessB45 mils36 mils
		
			0.701-1.000 inchA45 mils36 mils
		
			0.701-1.000 inchB60 mils48 mils
		
			1.001-1.500 inchA60 mils48 mils
		
			1.001-1.500 inchB80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseConstruction A: Internal wiring of x-ray equipment or electronic equipment.  Construction B: External wiring of electronic equipment in abuse areas (such as x-ray equipment and business machines).
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2461	Issued:1968-03-01
			Revised:2012-04-23


Rating	80 deg C, 300 Vac, Horizontal flame, Construction A, Cable flame, construction B.

Insulation	Labeled or complying with the AWM manufacturer's Procedure.

Assembly	Two or more insulated conductors, twisted pairs or groups twisted conductors twisted together. The insulated conductors or groups of insulated conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. A 6 mils or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC.
	Diameter of core assembly under jacket	Construction	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	A	30 mils	24 mils
	0.700 inch or less	B	45 mils	36 mils
	0.701-1.000 inch	A	45 mils	36 mils
	0.701-1.000 inch	B	60 mils	48 mils
	1.001-1.500 inch	A	60 mils	48 mils
	1.001-1.500 inch	B	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Construction A: Internal wiring of x-ray equipment or electronic equipment. Construction B: External wiring of electronic equipment in abuse areas (such as x-ray equipment and business machines).