UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2462
                        
                            Issued:1968-03-01
                    
                            Revised:2012-04-19
                    
                            Style
                            2462
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, 300 Vac, FT2 flame.
		
			Conductor24 AWG - 10 AWG, stranded.
		
			InsulationCONSTRUCTION A and C - Extruded PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point.
CONSTRUCTION B - Extruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point.
		
			AssemblyCONSTRUCTION A and C - two to seven insulated conductors, same as Type SVT.
CONSTRUCTION B - two to nine insulated conductors, same as Type SJT.
All construction - Different conductor sizes may be employed in one cord, no polarity identification required.
		
			ShieldOptional - One or more of the individually insulated conductors may be shielded or groups of individually insulated conductors may be shielded. Shielding over conductor shall consist of  36 AWG - 30 AWG tinned or untinned copper strands applied as a wrap or braid.
		
			JacketCONSTRUCTION A and B - Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
Construction C - Extruded PVC.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseCONSTRUCTION A - Internal wiring.
CONSTRUCTION B - Internal or external wiring.
CONSTRUCTION C - External wiring for Lighting Fixtures.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2462	Issued:1968-03-01
			Revised:2012-04-19


Rating	60 deg C, 300 Vac, FT2 flame.

Conductor	24 AWG - 10 AWG, stranded.

Insulation	CONSTRUCTION A and C - Extruded PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point. CONSTRUCTION B - Extruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point.

Assembly	CONSTRUCTION A and C - two to seven insulated conductors, same as Type SVT. CONSTRUCTION B - two to nine insulated conductors, same as Type SJT. All construction - Different conductor sizes may be employed in one cord, no polarity identification required.

Shield	Optional - One or more of the individually insulated conductors may be shielded or groups of individually insulated conductors may be shielded. Shielding over conductor shall consist of 36 AWG - 30 AWG tinned or untinned copper strands applied as a wrap or braid.

Jacket	CONSTRUCTION A and B - Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point. Construction C - Extruded PVC.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	CONSTRUCTION A - Internal wiring. CONSTRUCTION B - Internal or external wiring. CONSTRUCTION C - External wiring for Lighting Fixtures.