UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2463
                        
                            Issued:1968-03-01
                    
                            Revised:2013-01-02
                    
                            Style
                            2463
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 600 Vac, Cable flame.
		
			Conductor40 AWG minimum, solid or stranded.
		
			Insulated ConductorLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional, Extruded PVC, 6 mils minimum thickness at any point, over the conductor assembly.
		
			JacketExtruded PVC.
		
			Diameter of assembly under jacketConstruction A - Minimum average thicknessConstruction A - Minimum thickness at any pointConstruction B - Minimum average thicknessConstruction B - Minimum thickness at any point
		
			0.425 inches or less30 mils24 mils45 mils36 mils
		
			0.425-0.700 inches60 mils48 mils60 mils48 mils
		
			0.701-1.500 inches80 mils64 mils80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseConstruction A: Internal wiring of X-ray Equipment, or in the internal or exteral interconnection of electronic equipment. Construction B: External interconnection of electronic equipment in abuse areas, such as X-ray Equipment and Business Machines.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2463	Issued:1968-03-01
			Revised:2013-01-02


Rating	80 deg C, 600 Vac, Cable flame.

Conductor	40 AWG minimum, solid or stranded.

Insulated Conductor	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional, Extruded PVC, 6 mils minimum thickness at any point, over the conductor assembly.

Jacket	Extruded PVC.
	Diameter of assembly under jacket	Construction A - Minimum average thickness	Construction A - Minimum thickness at any point	Construction B - Minimum average thickness	Construction B - Minimum thickness at any point
	0.425 inches or less	30 mils	24 mils	45 mils	36 mils
	0.425-0.700 inches	60 mils	48 mils	60 mils	48 mils
	0.701-1.500 inches	80 mils	64 mils	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Construction A: Internal wiring of X-ray Equipment, or in the internal or exteral interconnection of electronic equipment. Construction B: External interconnection of electronic equipment in abuse areas, such as X-ray Equipment and Business Machines.