UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2477
                        
                            Issued:1968-10-17
                    
                            Revised:2012-07-20
                    
                            Style
                            2477
                        
                            Bonded Flat Ribbon Cable with Extruded Non-integral Jacket.
                    
			Rating60 deg C, voltage rating not specified, Cable flame.
		
			Conductor36 AWG min - 16 AWG max. Solid or Stranded.
		
			InsulationComplying with Sec. 1 of Manufacturer's AWM Procedure or Flat Ribbon Cable complying with Sec. 2 of Manufacturer's AWM Procedure.
		
			AssemblyTwo to fifty single conductors bonded together in such a fashion to form a flat ribbon- type cable; or a single flat ribbon cable.
		
			ShieldOptional.
		
			CoveringOptional - Over assembly or any group or groups of Conductors a barrier layer may be a nonmetallic fibrous wrap, serving or braid; paper; nylon; polyester; oriented polyethylene terephthalate; or a thermoplastic tape. Conductors in any one cable may be of the same AWG or mixed AWG.
		
			JacketExtruded PVC, 45 mils minimum average thickness, 36 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor internal wiring or external interconnection of electronic equipment. (Such as computers, business machines).
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2477	Issued:1968-10-17
			Revised:2012-07-20


Rating	60 deg C, voltage rating not specified, Cable flame.

Conductor	36 AWG min - 16 AWG max. Solid or Stranded.

Insulation	Complying with Sec. 1 of Manufacturer's AWM Procedure or Flat Ribbon Cable complying with Sec. 2 of Manufacturer's AWM Procedure.

Assembly	Two to fifty single conductors bonded together in such a fashion to form a flat ribbon- type cable; or a single flat ribbon cable.

Shield	Optional.

Covering	Optional - Over assembly or any group or groups of Conductors a barrier layer may be a nonmetallic fibrous wrap, serving or braid; paper; nylon; polyester; oriented polyethylene terephthalate; or a thermoplastic tape. Conductors in any one cable may be of the same AWG or mixed AWG.

Jacket	Extruded PVC, 45 mils minimum average thickness, 36 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For internal wiring or external interconnection of electronic equipment. (Such as computers, business machines).