UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2484
                        
                            Issued:1969-03-15
                    
                            Revised:2012-07-16
                    
                            Style
                            2484
                        
                            Flat Ribbon Cable.
                    
			Rating60 deg C, no voltage assigned.
		
			Conductor30 AWG - 26 AWG solid or stranded round, tinned, bare or silver plated copper.
		
			InsulationExtruded PE, 5 mils min average.
		
			AssemblyFive to one hundred conductors laid parallel and separated 0.011 inch minimum.
		
			CoveringConductors embedded in a polyethylene ribbon with 0.005 in. average, 0.001 in. minimum thickness; covered on flat side with polyolefin plus 0.005 in. polyester, total 0.007 in. minimum. Edges of strip insulated 0.010 in. minimum but not covered by polyolefin and polyester.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2484	Issued:1969-03-15
			Revised:2012-07-16


Rating	60 deg C, no voltage assigned.

Conductor	30 AWG - 26 AWG solid or stranded round, tinned, bare or silver plated copper.

Insulation	Extruded PE, 5 mils min average.

Assembly	Five to one hundred conductors laid parallel and separated 0.011 inch minimum.

Covering	Conductors embedded in a polyethylene ribbon with 0.005 in. average, 0.001 in. minimum thickness; covered on flat side with polyolefin plus 0.005 in. polyester, total 0.007 in. minimum. Edges of strip insulated 0.010 in. minimum but not covered by polyolefin and polyester.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.