UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2493
                        
                            Issued:1969-09-12
                    
                            Revised:2013-01-08
                    
                            Style
                            2493
                        
                            Multi-conductor Cable with Extruded Non-integral Jacket
                    
			Rating60 deg C, Voltage rating not specified, Cable flame.
		
			Insulated Conductor30-16 AWG, solid or stranded. Labeled or complying with Manufacturer's AWM Procedure except that AWM rated 30 volts for use in Class 2 circuits cannot be used.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together.  The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable.  The lay of the conductors is not specified.  A barrier layer and/or fillers are optional.  Manufacturer shall maintain a complete description of each assembly.  May use same or mixed AWG size.
		
			CoveringOptional.  Extruded PVC, 6 mils minimum thickness at any point, over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacket*Minimum average thicknessMinimum thickness at any point
		
			0.425 inch or less45 mils36 mils
		
			0.426-0.700 inch60 mils48 mils
		
			0.701-1.000 inch80 mils64 mils
		
			* - Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnect of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2493	Issued:1969-09-12
			Revised:2013-01-08


Rating	60 deg C, Voltage rating not specified, Cable flame.

Insulated Conductor	30-16 AWG, solid or stranded. Labeled or complying with Manufacturer's AWM Procedure except that AWM rated 30 volts for use in Class 2 circuits cannot be used.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional. Extruded PVC, 6 mils minimum thickness at any point, over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC
	Diameter of core assembly under jacket*	Minimum average thickness	Minimum thickness at any point
	0.425 inch or less	45 mils	36 mils
	0.426-0.700 inch	60 mils	48 mils
	0.701-1.000 inch	80 mils	64 mils
	* - Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnect of electronic equipment.