UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2495
                        
                            Issued:1969-12-03
                    
                            Revised:2012-04-12
                    
                            Style
                            2495
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 600 Vdc, Horizontal flame.
		
			Conductor22 AWG - 18 AWG consisting of 30 AWG or smaller stranded, tinned or bare copper.
		
			InsulationExtruded PVC, Conductors A, E, F, G, H, I, J 15 mils min average, 13 mils minimum at any point. Conductors B, C, D - 30 mils min average, 27 mils minimum at any point.
		
			AssemblyTen conductors cabled with nominal 4 in. right hand lay. Conductor A - 18 AWG. Conductors B, C, D, G, H, I, and J -22 AWG. Conductors E and F -20 AWG. Fillers, binders and wrap over core optional.
		
			ShieldTinned or untinned copper braid or wrap on Conductor A. Tinned or untinned copper braid over assembly of all conductors.
		
			JacketExtruded PVC, 15 mils min average, 12 mils minimum at any point. 15 mil wall over Conductor A shield; 30 mil wall overall.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInterconnecting cable for electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2495	Issued:1969-12-03
			Revised:2012-04-12


Rating	80 deg C, 600 Vdc, Horizontal flame.

Conductor	22 AWG - 18 AWG consisting of 30 AWG or smaller stranded, tinned or bare copper.

Insulation	Extruded PVC, Conductors A, E, F, G, H, I, J 15 mils min average, 13 mils minimum at any point. Conductors B, C, D - 30 mils min average, 27 mils minimum at any point.

Assembly	Ten conductors cabled with nominal 4 in. right hand lay. Conductor A - 18 AWG. Conductors B, C, D, G, H, I, and J -22 AWG. Conductors E and F -20 AWG. Fillers, binders and wrap over core optional.

Shield	Tinned or untinned copper braid or wrap on Conductor A. Tinned or untinned copper braid over assembly of all conductors.

Jacket	Extruded PVC, 15 mils min average, 12 mils minimum at any point. 15 mil wall over Conductor A shield; 30 mil wall overall.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Interconnecting cable for electronic equipment.