UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2501
                        
                            Issued:1970-04-07
                    
                            Revised:2013-01-07
                    
                            Style
                            2501
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating105 deg C, 600 Vac, Cable flame.
		
			Conductor40 AWG min, solid or stranded.
		
			Insulated ConductorLabeled or complying with Manufacturer's AWM Procedure
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional. Extruded PVC, 6 mils minimum thickness at any point, over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Diameter of cable under jacket*Minimum average thicknessMinimum thickness at any point
		
			0.700 inch or less60 mils48 mils
		
			0.701-1.500 inch80 mils64 mils
		
			1.501-2.500 inch110 milsg88 mils
		
			2.501 inch and larger140 mils112 mils
		
			* - Major diameter if cable is flat or oval.
		
			CoveringOptional, braid.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2501	Issued:1970-04-07
			Revised:2013-01-07


Rating	105 deg C, 600 Vac, Cable flame.

Conductor	40 AWG min, solid or stranded.

Insulated Conductor	Labeled or complying with Manufacturer's AWM Procedure

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional. Extruded PVC, 6 mils minimum thickness at any point, over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC.
	Diameter of cable under jacket*	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	60 mils	48 mils
	0.701-1.500 inch	80 mils	64 mils
	1.501-2.500 inch	110 milsg	88 mils
	2.501 inch and larger	140 mils	112 mils
	* - Major diameter if cable is flat or oval.

Covering	Optional, braid.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.