UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2504
                        
                            Issued:1970-07-14
                    
                            Revised:2012-07-13
                    
                            Style
                            2504
                        
                            Parallel Cable with Extruded Insulation with an Extruded Non-integral Jacket.
                    
			Rating105 deg C, 600 Vac, Cable flame.
		
			Conductor20 AWG - 14 AWG tinned or bare copper, consisting of 28 AWG or smaller copper strands, may be over-tinned.
		
			InsulationExtruded PVC, 30 mils min average, 27 mils minimum at any point.
		
			AssemblyTwo to three conductors.
		
			JacketExtruded PVC, 22 mils min average, 18 mils minimum at any point, with the following minimum (pin gauge) dimensions: Wall thickness: 0.022 inch Wall after rip: 0.022 inch
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2504	Issued:1970-07-14
			Revised:2012-07-13


Rating	105 deg C, 600 Vac, Cable flame.

Conductor	20 AWG - 14 AWG tinned or bare copper, consisting of 28 AWG or smaller copper strands, may be over-tinned.

Insulation	Extruded PVC, 30 mils min average, 27 mils minimum at any point.

Assembly	Two to three conductors.

Jacket	Extruded PVC, 22 mils min average, 18 mils minimum at any point, with the following minimum (pin gauge) dimensions: Wall thickness: 0.022 inch Wall after rip: 0.022 inch

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.