UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2514
                        
                            Issued:1970-10-23
                    
                            Revised:2012-07-25
                    
                            Style
                            2514
                        
                            Multi-conductor with Extruded Insulation and Extruded Non-integral Jacket.
                    
			Rating80 deg C, No Voltage Specified, Horizontal flame.
		
			ConductorNo. 26 AWG - 16 AWG solid or stranded round.
		
			InsulationExtruded PVC, 13 mils min average, 12 mils minimum at any point.
		
			AssemblyTwo conductors
		
			ShieldShielding over one or both conductors shall consist of 38-30 AWG. tinned copper strands applied as a wrap or braid, or a conducting thermoplastic with a parallel uninsulated drain wire.
		
			JacketExtruded PVC, 13 mils min average, 10 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2514	Issued:1970-10-23
			Revised:2012-07-25


Rating	80 deg C, No Voltage Specified, Horizontal flame.

Conductor	No. 26 AWG - 16 AWG solid or stranded round.

Insulation	Extruded PVC, 13 mils min average, 12 mils minimum at any point.

Assembly	Two conductors

Shield	Shielding over one or both conductors shall consist of 38-30 AWG. tinned copper strands applied as a wrap or braid, or a conducting thermoplastic with a parallel uninsulated drain wire.

Jacket	Extruded PVC, 13 mils min average, 10 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.