UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2516
                        
                            Issued:1970-10-21
                    
                            Revised:2019-11-06
                    
                            Style
                            2516
                        
                            Multi-conductor cable with non-integral jacket.
                    
			Rating105 deg C, 600 Vac, Cable flame.
		
			Conductor40 AWG min. solid or stranded round.
		
			InsulationLabeled or complying with Manufacturer's ConductorsAWM Procedure
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			Covering(Optional) A 6 mil or heavier extruded PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			major dia in inches
		
			0.425 or less45 mils min average36 mils minimum at any point
		
			0.426-0.700 dia60avg48 min
		
			0.701-1.500 dia8Oavg64 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnect.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2516	Issued:1970-10-21
			Revised:2019-11-06


Rating	105 deg C, 600 Vac, Cable flame.

Conductor	40 AWG min. solid or stranded round.

Insulation	Labeled or complying with Manufacturer's ConductorsAWM Procedure

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	(Optional) A 6 mil or heavier extruded PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC
	major dia in inches
	0.425 or less	45 mils min average	36 mils minimum at any point
	0.426-0.700 dia	60avg	48 min
	0.701-1.500 dia	8Oavg	64 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnect.