UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2544
                        
                            Issued:1971-07-19
                    
                            Revised:2012-06-30
                    
                            Style
                            2544
                        
                            Flat Cable using Non-Integral Extruded Jacket
                    
			Rating80 deg C, 600 Vac, Horizontal Flame.
		
			Conductor20-18 AWG, Stranded Round.
		
			InsulationLabeled Style 1015.
		
			AssemblyThirty-two conductors - One 18 AWG stranded copper wire on each edge of cable. Thirty 20 AWG stranded copper wire located between the two outer conductors. Conductors are laid parallel to each other at a nominal distance of 0.165 in. center to center. The jacket is applied over the insulated conductor. The entire assembly is approximately 5.25 in. wide and approximately 0.125 in. thick from top to bottom.
		
			JacketExtruded PVC, 8 mils minimum thickness. 16 mils maximum thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2544	Issued:1971-07-19
			Revised:2012-06-30


Rating	80 deg C, 600 Vac, Horizontal Flame.

Conductor	20-18 AWG, Stranded Round.

Insulation	Labeled Style 1015.

Assembly	Thirty-two conductors - One 18 AWG stranded copper wire on each edge of cable. Thirty 20 AWG stranded copper wire located between the two outer conductors. Conductors are laid parallel to each other at a nominal distance of 0.165 in. center to center. The jacket is applied over the insulated conductor. The entire assembly is approximately 5.25 in. wide and approximately 0.125 in. thick from top to bottom.

Jacket	Extruded PVC, 8 mils minimum thickness. 16 mils maximum thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.