UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2545
                        
                            Issued:1971-07-19
                    
                            Revised:2012-07-13
                    
                            Style
                            2545
                        
                            Parallel Cable with Extruded Non-integral Jacket.
                    
			Rating80 deg C, 600 Vac, Horizontal flame.
		
			Conductor28-20 AWG stranded round.
		
			InsulationLabeled style 1015.
		
			AssemblyTwenty-nine conductors, in each layer, are laid parallel to each other at a nominal distance of 0.165 in. center to center. Two 18 AWG on one edge and four 18 AWG on the other edge of each layer. Twenty-three 20 AWG located between the two groups 18 AWG wires in each layer. A total of 58 conductors. The jacket is applied over the insulated conductor. The two layers are placed back to back with a nominal 0.030 in. thick layer of adhesive between the two layers. The entire assembly is approximately 5 in. wide with an over-all thickness of approximately 0.330 in.
		
			JacketExtruded PVC, 16 mils maximum wall thickness, 8 mils minimum wall thickness over the insulated conductors, top side. The back side has a 30 mils maximum and a 20 mils minimum wall thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2545	Issued:1971-07-19
			Revised:2012-07-13


Rating	80 deg C, 600 Vac, Horizontal flame.

Conductor	28-20 AWG stranded round.

Insulation	Labeled style 1015.

Assembly	Twenty-nine conductors, in each layer, are laid parallel to each other at a nominal distance of 0.165 in. center to center. Two 18 AWG on one edge and four 18 AWG on the other edge of each layer. Twenty-three 20 AWG located between the two groups 18 AWG wires in each layer. A total of 58 conductors. The jacket is applied over the insulated conductor. The two layers are placed back to back with a nominal 0.030 in. thick layer of adhesive between the two layers. The entire assembly is approximately 5 in. wide with an over-all thickness of approximately 0.330 in.

Jacket	Extruded PVC, 16 mils maximum wall thickness, 8 mils minimum wall thickness over the insulated conductors, top side. The back side has a 30 mils maximum and a 20 mils minimum wall thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.