UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2548
                        
                            Issued:1971-10-12
                    
                            Revised:2012-04-19
                    
                            Style
                            2548
                        
                            Multiple Conductor with Extruded Insulation and Extruded Non-Integral Jacket.
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			Conductor26 AWG - 16 AWG solid or stranded round.
		
			InsulationExtruded PE, 10 mils minimum average thickness, 9 mils minimum thickness at any point.
		
			AssemblyTwo to four conductors.
		
			ShieldOptional. One or more conductors may have shielding consisting of 38-30 AWG tinned copper strands applied as a wrap or braid or a wrap of aluminum faced "Polyester" tape with an uninsulated drain wire or a conductive PVC shield with uninsulated drain wire.
		
			JacketExtruded PVC, 22 mils minimum average thickness, 18 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Electronic Use in Non-Hazardous Locations.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2548	Issued:1971-10-12
			Revised:2012-04-19


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	26 AWG - 16 AWG solid or stranded round.

Insulation	Extruded PE, 10 mils minimum average thickness, 9 mils minimum thickness at any point.

Assembly	Two to four conductors.

Shield	Optional. One or more conductors may have shielding consisting of 38-30 AWG tinned copper strands applied as a wrap or braid or a wrap of aluminum faced "Polyester" tape with an uninsulated drain wire or a conductive PVC shield with uninsulated drain wire.

Jacket	Extruded PVC, 22 mils minimum average thickness, 18 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Electronic Use in Non-Hazardous Locations.