UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2549
                        
                            Issued:1972-01-07
                    
                            Revised:2011-08-04
                    
                            Style
                            2549
                        
                            Multiple-Conductor Cable with Extruded Non-Integral Jacket
                    
			Rating90 deg C, 300 Vac, Cable flame.
		
			Conductor40-16 AWG solid or stranded round
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.  May use same or mixed AWG size. Fillers - Required if necessary to form a relatively smooth round core for extrusion of outer jacket.
		
			ShieldOptional.
		
			CoveringOptional - Extruded PVC, 6 mils minimum thickness at any point
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacket (inches)¿Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.700 or less3024
		
			0.701-1.0006048
		
			1.001-1.5008064
		
			¿ Major diameter if cable is flat or oval
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment or internal wiring of appliances or electric equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2549	Issued:1972-01-07
			Revised:2011-08-04


Rating	90 deg C, 300 Vac, Cable flame.

Conductor	40-16 AWG solid or stranded round

Insulation	Labeled or complying with Manufacturer's AWM Procedure

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size. Fillers - Required if necessary to form a relatively smooth round core for extrusion of outer jacket.

Shield	Optional.

Covering	Optional - Extruded PVC, 6 mils minimum thickness at any point

Jacket	Extruded PVC
	Diameter of core assembly under jacket (inches)¿	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.700 or less	30	24
	0.701-1.000	60	48
	1.001-1.500	80	64
	¿ Major diameter if cable is flat or oval

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment or internal wiring of appliances or electric equipment.