UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2551
                        
                            Issued:1971-12-07
                    
                            Revised:2012-03-12
                    
                            Style
                            2551
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating105 deg C, 30 Vac, Cable flame.
		
			Conductor40 AWG min. solid or stranded round, tinned or bare.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more insulated singles or groups of individually Assembly insulated singles cabled together. All insulated singles in any group shall be twisted together. If more than one group is used, groups shall also be twisted. The length of lay of the twisted cables or groups is not specified. Fillers may be used. A barrier layer may be applied over the assembly of the conductors or groups of conductors.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacket (inches) ¿Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.425 or less3024
		
			0.426-0.7004536
		
			0.701-1.0006048
		
			1.001-1.5008062
		
			1.501-2.50011088
		
			2.501 and larger140112
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Interconnecting Cable for Electronic Data- Processing Class - 2 Circuits Where Terminated in connectors.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2551	Issued:1971-12-07
			Revised:2012-03-12


Rating	105 deg C, 30 Vac, Cable flame.

Conductor	40 AWG min. solid or stranded round, tinned or bare.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more insulated singles or groups of individually Assembly insulated singles cabled together. All insulated singles in any group shall be twisted together. If more than one group is used, groups shall also be twisted. The length of lay of the twisted cables or groups is not specified. Fillers may be used. A barrier layer may be applied over the assembly of the conductors or groups of conductors.

Jacket	Extruded PVC
	Diameter of core assembly under jacket (inches) ¿	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.425 or less	30	24
	0.426-0.700	45	36
	0.701-1.000	60	48
	1.001-1.500	80	62
	1.501-2.500	110	88
	2.501 and larger	140	112

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Interconnecting Cable for Electronic Data- Processing Class - 2 Circuits Where Terminated in connectors.