UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2558
                        
                            Issued:1972-01-05
                    
                            Revised:2012-01-10
                    
                            Style
                            2558
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			Conductor29 AWG - 20 AWG solid or stranded round, copper, copper-clad steel, copper alloy, bare, tinned or silver-coated, having a min of 40 percent conductivity.
		
			InsulationExtruded FRPE, 15 mils min average thickness, 13 mils minimum thickness at any point. Over the conductor shall be applied a spiral wrap of flame-retardant polyethylene thread nominally 15 mils in dia, approx 1/2 in between turns. This assembly shall be enclosed with a flame retardant polyethylene tube having an approx 15 mils wall.
		
			AssemblyTwo to nine conductors laid flat to Assemblyform a ribbon type cable with a max width of 1 in.
		
			ShieldA shield over each tube shall consist of a wrap of aluminum faced Polyester tape with a drain wire applied under the shield.
		
			JacketExtruded PVC, 30 mils min average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring and exteral interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2558	Issued:1972-01-05
			Revised:2012-01-10


Rating	60 deg C, 30 Vac, Horizontal flame.

Conductor	29 AWG - 20 AWG solid or stranded round, copper, copper-clad steel, copper alloy, bare, tinned or silver-coated, having a min of 40 percent conductivity.

Insulation	Extruded FRPE, 15 mils min average thickness, 13 mils minimum thickness at any point. Over the conductor shall be applied a spiral wrap of flame-retardant polyethylene thread nominally 15 mils in dia, approx 1/2 in between turns. This assembly shall be enclosed with a flame retardant polyethylene tube having an approx 15 mils wall.

Assembly	Two to nine conductors laid flat to Assemblyform a ribbon type cable with a max width of 1 in.

Shield	A shield over each tube shall consist of a wrap of aluminum faced Polyester tape with a drain wire applied under the shield.

Jacket	Extruded PVC, 30 mils min average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring and exteral interconnection of electronic equipment.