UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2563
                        
                            Issued:1972-02-28
                    
                            Revised:2012-04-18
                    
                            Style
                            2563
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket.
                    
			Rating60 deg C, 600 Vac, Horizontal flame.
		
			Conductor18 AWG - 10 AWG, solid or stranded.
		
			InsulationExtruded PVC, 47 mils minimum average thickness, 43 mils minimum thickness at any point.
		
			AssemblyTwo Through Ten Conductors. Different conductor sizes may be used in one cord. Two conductors may be laid parallel or twisted together. Three or more conductors shall be twisted together. Lay of insulated conductors not specified.
		
			Inner JacketExtruded PVC, 94 mils minimum average thickness, 75 mils minimum thickness at any point.
		
			ShieldOptional. A 1-mil Polyester tape and/or a 36 AWG - 30 AWG tinned or untinned copper applied as a wrap or braid.
		
			Outer JacketExtruded PVC, 50 mils minimum average thickness, 40 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring and external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2563	Issued:1972-02-28
			Revised:2012-04-18


Rating	60 deg C, 600 Vac, Horizontal flame.

Conductor	18 AWG - 10 AWG, solid or stranded.

Insulation	Extruded PVC, 47 mils minimum average thickness, 43 mils minimum thickness at any point.

Assembly	Two Through Ten Conductors. Different conductor sizes may be used in one cord. Two conductors may be laid parallel or twisted together. Three or more conductors shall be twisted together. Lay of insulated conductors not specified.

Inner Jacket	Extruded PVC, 94 mils minimum average thickness, 75 mils minimum thickness at any point.

Shield	Optional. A 1-mil Polyester tape and/or a 36 AWG - 30 AWG tinned or untinned copper applied as a wrap or braid.

Outer Jacket	Extruded PVC, 50 mils minimum average thickness, 40 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring and external interconnection of electronic equipment.