UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2564
                        
                            Issued:1972-03-22
                    
                            Revised:2012-07-25
                    
                            Style
                            2564
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating75 deg C, 125 Vac, FT2 flame.
		
			Conductor22 AWG circuit, 22 AWG - 18 AWG grounding; consisting of twenty six of 36 AWG strands round, tinned or bare copper.
		
			InsulationExtruded PVC, 9 mils min average, 8 mils min. at any point.
		
			AssemblyTwo to Three Conductors twisted together with a maximum lay of Assembly 1-1/2 inches. One conductor shall be solid white or natural gray. The third, if provided, shall be green with or without a yellow stripe.
		
			JacketExtruded PVC, 15 mils min average, 12 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseTwo Conductor Cord or Three Conductor Cord with with No. 18 AWG Grounding Conductor: "For use as listed power supply cords (permanently attached and not exceeding 8 feet in length) for curling irons, wood burning appliances, or 1/2 pound and lighter soldering irons; rated 50 watts or less." Three Conductor Cord Grounding Smaller than No. 18 AWG: "For use as listed power supply cords (permanently attached and not exceeding 8 feet in length) for 1/2 pound and lighter soldering irons where grounding is not required; rated 50 watts or less.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2564	Issued:1972-03-22
			Revised:2012-07-25


Rating	75 deg C, 125 Vac, FT2 flame.

Conductor	22 AWG circuit, 22 AWG - 18 AWG grounding; consisting of twenty six of 36 AWG strands round, tinned or bare copper.

Insulation	Extruded PVC, 9 mils min average, 8 mils min. at any point.

Assembly	Two to Three Conductors twisted together with a maximum lay of Assembly 1-1/2 inches. One conductor shall be solid white or natural gray. The third, if provided, shall be green with or without a yellow stripe.

Jacket	Extruded PVC, 15 mils min average, 12 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Two Conductor Cord or Three Conductor Cord with with No. 18 AWG Grounding Conductor: "For use as listed power supply cords (permanently attached and not exceeding 8 feet in length) for curling irons, wood burning appliances, or 1/2 pound and lighter soldering irons; rated 50 watts or less." Three Conductor Cord Grounding Smaller than No. 18 AWG: "For use as listed power supply cords (permanently attached and not exceeding 8 feet in length) for 1/2 pound and lighter soldering irons where grounding is not required; rated 50 watts or less.